×

Colour Options

Standard Exterior & Interior Frame Species

Fingerjoint Pine

Fingerjoint Pine

Optional Exterior & Interior Frame Species

  • Clear Pine
  • Clear Oak
  • Clear Mahogany

Glass Options

Low E Options

low e options

Clear | Hard Coat Low E (3) - CLLE

This is a durable hard-coated low-emissivity glass that provides passive solar gain resulting in year-round cost savings. Used on the 3rd surface it maximizes energy efficiency in the colder Northern region climates, where heating is dominant and the greatest energy concern.

Soft Coat Low E (2) | Clear – SBCL

The soft-coated low-e glass provides solar heat control in moderate to warm climates. The neutral appearance and high level of natural light transmitted makes this glass ideal solution for homes where heating and cooling requirements vary throughout the year.

Hard Coat Low E (2) | Hard Coat Low E (4) - LELE

The addition of a 4th surface Low E technology on insulating glass units allows you to improve the performance of a unit by approximately 15-20%.  During cold conditions the coating on surface 2 reduces the heat lost from the airspace to the outside and the coating on surface 4 will reflect heat back into the room.

Soft Coat Low E (2) | Hard Coat Low E (4) - SBLE

The addition of a 4th surface Low E technology on insulating glass units allows you to improve the performance of a unit by approximately 15-20%.  During warm conditions the coating on surface 2 reflects solar energy outside and the coating on surface 4 will reflect heat back into the room during cold conditions.

Glass Spacer Options

Warm Edge Technology

Golden Windows uses only Warm Edge Technology (W.E.T) spacers in their windows.
Warm Edge Technology is a generic term for any spacer bar or system that has better thermal performance than a highly conductive aluminum spacer bar. The two W.E.T spacers that Golden Windows uses are the tin Intercept spacer and the Edgetech Superspacer. 

Intercept®:

The intercept spacer is a tin bar that is coated with butyl and holds panes of glass apart in a window. The butyl is used to keep the bar from touching the glass so its conductive properties are reduced. The butyl is also a vital component in maximizing argon gas retention in the sealed insul glass unit.

intercept spacer

Superspacer®:

The Superspacer helps to deliver windows of the highest standards. Superspacer is a non-metal structural foam spacer system that holds panes of glass apart in a window.
Superspacer has excellent resistance to nitrogen and argon gas absorption and it has high UV resistance. It has 100% memory meaning it will return to its original shape allowing for expansion and contraction, which is a major cause of stress fractures in conventional sealed units.

Superspacer

Grille Options

Grille Patterns

Colonial

Colonial

Muskoka

Muskoka

Victorian

Victorian

2" Horizontal

2" Horizontal

Custom

Custom

Grilles Between Glass (GBG)

5/16" Narrow Pewter

5/16" Narrow Pewter

5/16" Narrow Brass

5/16" Narrow Brass

5/8" Standard Flat

5/8" Standard Flat

3/4" Georgian

3/4" Georgian

5/8" Standard Flat & 3/4" Georgian available in:

Golden White

Golden White

Taupe

Taupe

Golden Sable

Golden Sable

Black

Black

Split finish also available in 5/8" Standard Flat & 3/4" Georgian.

Simulated Divided Lite (SDL)

1" Exterior SD

1" Exterior SDL

2" Exterior Mullion

2" Exterior Mullion

1" Interior SDL

1" Interior SDL

2" Interior Mullion

2" Interior Mullion

Wood Removable

1" Removable Profile

1" Removable Profile

Available in:

Pine

Pine

Hardware Options

Optional Multi-point Lock Handle

brass

Brass

Antique Brass

Antique Brass

Bright Chrome

Bright Chrome

Brushed Nickel

Brushed Nickel

Oil Rubbed Bronze

Oil Rubbed Bronze

Western Pewter

Western Pewter

Hinges

Brushed Nickel-Standard

Brushed Nickel-Standard

Brass

Brass

Bright Chrome

Bright Chrome

Oil Rubbed Bronze

Oil Rubbed Bronze

Western Pewter

Western Pewter

Optional

Self-Closing Brushed Chrome

Self-Closing Brushed Chrome

Stainless Steel Outswing

Stainless Steel Outswing

Sizes & Shapes

Double And Triple Wide Size Grid

Double And Triple Wide Size Grid

Performance

Golden Window Products are manufactured and pre-assembled to conform to AAMA/WDMA/CSA101/I.S.2/A440-08, “NAFS - North American Fenestration Standard / Specification for Windows, Doors, and Skylights” and CSA A440S1-09, “Canadian
Supplement to AAMA/WDMA/CSA101/I.S.2/A440-08, NAFS - North American Fenestration Standard / Specification for Windows, Doors, and Skylights” and the applicable requirements of the 2012 Ontario Building Code.
Clad/Wood Entry Door
Class LC-PG35: Size tested 2849 x 2478 mm (112.2 x 97.6)-Type SHD
Positive Design Pressure = 1680 Pa (35 psf)
Negative Design Pressure = -1680 Pa (-35 psf)
Water Penetration Resistance Test Pressure = 260 Pa (5.25 psf)
Canadian Air Infiltration/Exfiltration = A3 Level

Appropriate selection of Golden Window’s windows, doors, and accessories which conform to all applicable laws, ordinances,
building codes and safety requirements is the sole responsibility of the architect, building owner and/or contractor. All risks related to building design and construction, maintenance, or the installation and use of Golden Windows Limited products shall be assumed by Buyer and/or User.

For Professionals

Vertical Section

Operating Panel vertical section
       Operating Panel

Horizontal Section

  Two Panel horizontal section
      Two Panel

Drawings are not to scale.

services

Do you require
installation services?

We can help

professionals

Resources and Information
for professionals

Common Door Problems and How to Fix Them | Golden Windows

In this guide, we'll explore some of the most common door issues homeowners face with step-by-step solutions for getting your doors back in top shape.

October 08, 2024

View Post